Slackware ARM on a Raspberry Pi


Slackware ARM 14.2 installer image and system packages

This SARPi installer has been created specifically for the Raspberry Pi 3 Model B to install Slackware ARM 14.2 soft float port, and incorporates the kernel_sarpi3, kernel-modules-sarpi3, sarpi3-boot-firmware, and sarpi3-hacks-3.0 packages. The installer and packages were built on a Raspberry Pi 3 Model B Rev 1.2 (rev: a02082) running Slackware ARM 14.2, using the official Slackware ARM mini root filesystem and Raspberry Pi Foundation GitHub repository sources.

This SARPi installer image was created on 2020-01-14 08:30:54 [CET] and uses kernel 5.4.8-v7-arm.

This image is the Slackware ARM 14.2 soft float port installer for the Raspberry Pi 3.

The installer is available as a disk image (.xz) archive or as a .zip archive that contains all the /boot files which you can decompress and manage yourself. Click on the filename to download. Click on md5 for the file checksum.

Slackware ARM installer Checksum
sarpi3-installer_slack14.2_14Jan20_sp1.img.xz md5
sarpi3-installer-boot_slack14.2_14Jan20_sp1.zip md5
 
System Packages
kernel_sarpi3-5.4.8-armv7-1_slack14.2_14Jan20_sp1.txz md5
kernel-modules-sarpi3-5.4.8-armv7-1_slack14.2_14Jan20_sp1.txz md5
sarpi3-boot-firmware-armv7-1_slack14.2_14Jan20_sp1.txz md5
sarpi3-hacks-3.0-armv7-1_slack14.2_14Jan20_sp1.txz md5

SARPi file descriptions

• sarpi3-installer_slack14.2 - Slackware ARM -current installer disk image archive (.xz) for the Raspberry Pi 3. The installer was constructed using the official Slackware ARM mini root filesystem and Raspberry Pi Foundation GitHub repository source. See the SARPi Slackware ARM Installation Guide [or the included README] for details on how to use this image for installing Slackware ARM on a Raspberry Pi 3.

• sarpi3-installer-boot_slack14.2 - Raspberry Pi 3 boot-firmware, Linux kernel, and initrd [RAM disk minirootfs containing the Slackware ARM installer] compressed file archive (.zip). They are exactly the same files as those within the sarpi3-installer_slack14.2 disk image archive (.xz). The difference being that these files can be extracted and easily managed individually, without having to write the entire image to a SD card.

• kernel_sarpi3-5.4.8 - Linux kernel package for the Raspberry Pi 3. This Linux kernel has been prepared specifically for the Raspberry Pi 3 device using the official source from the Raspberry Pi Foundation repository: https://github.com/raspberrypi/linux/

• kernel-modules-sarpi3-5.4.8 - kernel modules package for the Raspberry Pi 3. Kernel modules are pieces of object code that can be dynamically loaded into the Linux kernel to provide new functions. A lot of these modules provide support for devices such Wi-Fi adapters, sound devices, and other hardware. You can select which modules you want to load by editing /etc/rc.d/rc.modules.

• sarpi3-boot-firmware - Closed source boot-firmware blobs package for the Raspberry Pi 3. These blobs are essential for booting the RPi3 device successfully. This boot-firmware was prepared specifically for the RPi3 device using the official source from the Raspberry Pi Foundation repository: https://github.com/raspberrypi/firmware

• sarpi3-hacks-3.0 - Fixes/modifications for Slackware ARM on a Raspberry Pi 3. See the sarpi-hacks.README for further details.

Support for Slackware ARM

If you're in need of help, or have something to contribute, one of the best places to get (and offer) support for Slackware ARM is on the Linux Questions Forum. Another priceless resource is the Slackware Documentation Project.


Updated: 08 Jan 2020 13:07:11